Hot rolled picked steel coil
|Item||Hot rolled pickled steel coil|
|Introduction||The iron oxide scale on the surface of the steel is an alkaline oxide that is insoluble in water, and its thickness is generally 5-20um. Because their linear expansion coefficient is smaller than that of steel, many micro-cracks are formed on the surface when the hot-rolled steel coil is cooled. When the acid solution is sprayed on the surface of the acid solution, these alkaline oxides undergo a series of chemical reactions in the acid solution.At the same time, the oxide scale on the surface of carbon steel or low alloy steel is relatively loose, and even has cracks and pores. Therefore, while the acid solution reacts with the iron oxide scale, it reacts with the base iron of the steel through its cracks and pores.|
|Standard||ASTM, DIN, ISO, EN, JIS, GB, etc.|
|Material||A53, A283-D , A135-A , A53-A, A106-A, A179-C, A214-C, A192, A226, A315-B, A53-B, A106-B, A178-C, A210-A-1, A210-C, A333-1.6, A333-7.9, A333-3.4, A333-8, A334-8, A335-P1, A369-FP1, A250-T1, A209-T1, A335-P2, A369-FP2, A199-T11, A213-T11, A335-P22, A369-FP22, A199-T22, A213-T22, A213-T5, A335-P9, A369-FP9, A199-T9, A213-T9,etc.|
|Width: 600mm-1500mm, or as required.
Thickness: 0.15mm-6mm, or as required.
|Surface||Bare, Shot Blasted and Spray Paint, or as customers’ requirement.|
|Application||Automobile industry: The main application of hot-rolled pickling in the automobile industry is: automobile chassis systems, including main beams, auxiliary beams, etc. Wheels, including car rims, wheel radiation, etc. Filter, hinged cab panel. The compartment board is mainly the compartment floor of various trucks. Other stamping parts, including anti-collision bumpers, brake sleeves and other small internal parts of automobiles.
Machinery industry: mainly including textile machinery, mining machinery, windmills and some general machinery.
Light industrial household appliances: household appliances, mainly used to manufacture chemical oil drums such as compressor shells (upper and lower shells), brackets, and water heater inner tanks.
Others: bicycle parts, motorcycle industry (stamping parts), various welded pipes, electrical cabinets, highway guardrails, supermarket shelves, warehouse shelves, fences, iron ladders and stamping parts of various shapes. The quality characteristics of pickled boards: surface morphology, stamping performance, thickness tolerance. At present, the industry with the largest amount of pickling plates is the compressor industry and brackets, followed by bicycles. Other industries can be used for machinery, rack elevators, etc.
|Package||Standard export package, or as required.|
|Price term||Ex-work, FOB, CIF, CFR, etc.|
|Payment||T/T, L/C, Western Union, etc.|
|Certificates||ISO, SGS, BV.|
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.