Quality Inspection for High Frequency Welded Pipe Factory Hot rolled steel plate – Star Good Steel
Quality Inspection for High Frequency Welded Pipe Factory Hot rolled steel plate – Star Good Steel Detail:
| Item | Hot rolled steel plate/ sheet |
| Introduction | Using continuous casting slab or blooming slab as raw material, it is heated by a walking heating furnace, high-pressure water is descaled and then enters the rough rolling mill. The rough rolling material is cut head, tail, and then enters the finishing rolling mill for computer-controlled rolling. After the final rolling, it undergoes laminar cooling (computer-controlled cooling rate) and coiled by a coiler to become a straight hair coil. The head and tail of straight hair curlers are often tongue-shaped and fish-tail-shaped, with poor thickness and width accuracy, and the edges often have defects such as wave shape, hemming, and tower shape. The coil weight is heavier, and the inner diameter of the steel coil is 760mm. After the straight hair coil is processed by a finishing line such as head-cutting, tail-cutting, edge-trimming, and multi-pass straightening and leveling, then it is cut or re-coiled to become: hot-rolled steel plate, flattened hot-rolled steel coil, longitudinal Cut tape and other products. If the hot-rolled finished coil is pickled to remove the oxide scale and coated with oil, it will become a hot-rolled pickled coil. This product has a tendency to partially replace cold-rolled sheet, and the price is moderate, and it is deeply loved by the majority of users. Good ductility, cold-rolled sheet has high hardness and relatively difficult processing, but it is not easy to deform and has high strength. The strength of the hot-rolled plate is relatively low, and the surface quality is poor (oxidationlow finish), but the plasticity is good, generally medium and thick plates, cold-rolled plates: high strengthhigh hardness, high surface finish, generally thin plates, can be used as stamping Used board. Hot-rolled steel plate has mechanical properties far inferior to cold working and inferior to forging processing, but it has better toughness and ductility. |
| Standard | ASTM, DIN, ISO, EN, JIS, GB, etc. |
| Material | A53, A283-D, A135-A, A53-A, A106-A, A179-C, A214-C, A192, A226, A315-B, A53-B, A106-B, A178-C, A210-A-1, A210-C, A333-1.6, A333-7.9, A333-3.4, A333-8, A334-8, A335-P1, A369-FP1, A250-T1, A209-T1, A335-P2, A369-FP2, A199-T11, A213-T11, A335-P22, A369-FP22, A199-T22, A213-T22, A213-T5, A335-P9, A369-FP9, A199-T9, A213-T9, 523M15, En46, 150M28, 150M19, 527A19, 530A30,etc.
Q345, Q345A, Q345B, Q345C, Q345D, Q345E, Q235B, HC340LA, HC380LA, HC420LA, B340LA, B410LA, 15CRMO, 12Cr1MoV, 20CR, 40CR, 65MN, A709GR50 |
| Size
|
Length: 1m-12m, or as required
Width: 0.6m-3m, or as required Thickness: 0.1mm-300mm, or as required |
| Surface | clean, finishing, blasting and painting according to your requirement. |
| Application | Types and uses:
1. Structural steel Mainly used in the production of steel structure parts, bridges, ships and vehicles. 2. Weather-resistant steel Adding special elements (P, Cu, C, etc.), has good corrosion resistance and atmospheric corrosion resistance, used in the production of containers and special vehicles, and also used in building structures. 3. Steel for automobile structure High-strength steel plates with good stamping and welding properties are used in the production of automobile FRAME, WHEEL, etc. 4. Hot rolled special steel Carbon steel, alloy steel, and tool steel for general mechanical structure are used in the production of various mechanical parts after heat treatment. 5. Cold rolled original plate Used to produce various cold-rolled products, including CR, GI, color-coated sheets, etc. 6. Steel plate for steel pipe It has good processing performance and compressive strength, and is used to produce high-pressure gas pressure vessels filled with LPG, acetylene gas and various gases with an internal volume of less than 500L. 7. Steel plate for high pressure vessel It has good processing performance and compressive strength, and is used to produce high-pressure gas pressure vessels filled with LPG, acetylene gas and various gases with an internal volume of less than 500L. 8. Stainless steel plate Stainless steel has good corrosion resistance and is mainly used in the food industry, surgical equipment, aerospace, petroleum, and chemical industries. |
| Package | Standard export package, or as required. |
| Price term | Ex-work, FOB, CIF, CFR, etc. |
| Payment | T/T, L/C, Western Union, etc. |
| Certificates | ISO, SGS, BV. |
Customer evaluation
The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
Product detail pictures:
Related Product Guide:
Fast and fantastic quotations, informed advisers to help you choose the correct products that suits all your needs, a short manufacturing time, responsible good quality control and distinct companies for paying and shipping affairs for Quality Inspection for High Frequency Welded Pipe Factory Hot rolled steel plate – Star Good Steel , The product will supply to all over the world, such as: Mumbai, Zambia, Chile, We hope to have long-term cooperation relationships with our clients. If you are interested in any of our products, make sure you do not hesitate to send enquiry to us/company name. We ensure that you can be totally satisfied with our best solutions!
By Cindy from Greece - 2018.09.29 13:24
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Janet from Malaysia - 2017.06.25 12:48
